LG WM2411HW Service Manual
LG WM2411HW Service Manual |
To get the best wash performance, the optimal weather is determined by the temperature of the water, the wash temperature selected and the size of the load. This model incorporates a pressure sensor that can detect the level of water in the tub. Water supply stops when the water level reaches the preset level, the cycle continues. Spinning does not continue until the bath water is drained to a certain level. The door can be opened by pulling the door handle whenever the washer is not in use. When the cycle is complete, the door lock light will go out. If there has been a power failure during operation, the door is blocked for 5 minutes. Click the sounds can be heard when the door is locked/unlocked.
Before performing maintenance, ask the customer what is the problem. Check the settings (the power supply is AC 120V, remove transport screws). Refer to the troubleshooting guide. Plan your service method by referring to the disassembly instructions. Service to the unit. After maintenance, operate the appliance to see if it works correctly. Beware of electric shock disconnect parts during troubleshooting. Each terminal voltage is 120 V AC and DC when the unit is plugged in. The washer must be empty and the controls must be in the off State. Press the SPIN SPEED and SOIL LEVEL buttons simultaneously. Press the power button, while the previous condition. Then it rings twice. To advance to the next step of the test mode, press the START / PAUSE once.
.
0 Response to "LG WM2411HW Service Manual"
Post a Comment